JUKI SC-810 User Manual

– 10 –
2. Explanation of the operation panel
1
/ switch : Used for determining the contents of setting.
When this switch is pressed, ashing stops and the contents of
setting are determined.
2
/ switch : Used for changing the contents of setting.
When this switch is pressed, changeable positions ash on and off.
By pressing the switch, ashing position shifts in the right direction.
3
switch : Used for changing the contents of the selected display (ashing
section). When this switch is pressed, the contents of the display
increase.
4
switch : Used for changing the contents of the selected display (ashing
section).
When this switch is pressed, the contents of the display decrease.
5
PATTERN SELECTION display : The selected LED lamp lights up in case of
A
reverse stitching
LED and
B
overlapped stitching.
6
REVERSE STITCHING : Rendered effective when reverse stitching pattern is selected.
AT START display “ ” Without reverse stitching display / “ ” Reverse stitching display /
“ ” Double reverse stitching display
7
REVERSE STITCHING : Rendered effective when reverse stitching pattern is selected.
AT END display “
” Without reverse stitching display / “ ” Reverse stitching display /
“
” Double reverse stitching display
8
NUMBER OF STITCHES display : Number of stitches of reverse stitching or overlapped stitching is
displayed.
9
AUTOMATIC : Lights up when the automatic thread trimming by depressing the
THREAD TRIMMING display front part of the pedal is selected.
(Lights up when the overlapped stitching is selected.)
!0
THREAD TRIMMING : Lights up when the thread trimming prohibition is selected.
PROHIBITION display Function setting No. 9
!1
ONE-SHOT AUTOMATIC : Lights up when the one-shot automatic stitching is selected.
STITCHING display (Lights up when the overlapped stitching is selected.)
1
2
4
3
!1
6
7
8
9
!0
5
A
B

JUKI SC-810 Specifications

General

Brand	JUKI
Model	SC-810
Category	Sewing Machine
Language	English