JUKI SC-810 User Manual

ii
This model is intended for commercial use.
BEFORE OPERATION “IMPORTANT SAFETY INSTRUCTIONS”
When using the sewing machine, basic safety precautions should always be followed, including the following: Read all
instructions before using
DANGER
–To reduce the risk of electric shock:
WARNING
–Toreducetheriskofbums,re,electricshock,orinjurytopersons:
1. Do not allow to he used as a toy. Close attention is necessary when this machine is used by or near children.
2. Use this machine only for its intended use as described in this manual. Use only attachments
recommended by the manufacturer as contained in this manual.
3. Never operate this machine if it is not working properly, if it has been dropped or damaged, or dropped
into water. Return the machine to the nearest authorized dealer or service center for examination, repair,
electrical or mechanical adjustment.
4. Never drop or insert any object Into any opening.
5. Do not use outdoors.
6. Do not operate where aerosol (spray) products are being used or where oxygen is being administered.
7. To disconnect, turn ail controls to the off position, then remove plug form outlet.
8. Neveroperatethemachineunlessitsoilpanhasbeenlledwithoil.
OPERATION PRECAUTIONS “SAVE THESE INSTRUCTIONS”
1. Never operate the machine with any air openings blocked. Keep ventilation openings of the sewing
machine tree from the accumulation of lint, dust, and loose cloth.
2. Keepngersawayfromallmovingparts.Specialcareisrequiredaroungthesewingmachineneedle.
3. Always use the proper needle plate. The wrong plate can cause the needle to break.
4. Do not use bent needles.
5. Donotpullorpushfabricwhilestitching.Itmaydeecttheneedlecausingittobreak.
6. Switch the sewing machine off when making any adjustments in the needle area, such as threading needle,
changing needle, threading bobbin, or changing presser foot, and the like.
7. Always disconnect power source from sewing machine when removing covers, Iubricating, or when
making any other user servicing adjustments mentioned in the Instruction manual.
8. Keep your hands away from the needle when you turn the power switch ON or while the machine is
operating.
9. Donotputyourngersintothethreadtake-upcoverwhilethemachineisoperating.
10. Be sure to turn the power switch OFF before tilting the machine head or removing the V belt.
11. While the sewing machine is in operation, be careful not to allow your or any other person’s head or
hands to come close to the handwheel, V belt, bobbin winder or motor. Also, do not place anything close
to them. Doing so may be dangerous.
12. Ifyourmachineisprovidedwithabeltcover,ngerguardoranyotherprotectors,donotoperateyour
machine with any of them removed.
13. To achieve security, be sure that the power supply earth wire has been connected before operating the
sewing machine.
14. No motor sound is heard when the sewing machine is not operating. So, do not forget to turn the power
OFF at the end of work.
15. When you move the unit from a cold place directly to a warm place, dew condensation may result. Turn
ONthepowertotheunitafteryouhaveconrmedthereisnofearofdewcondensation.
16. In case of thunder, be sure to stop the unit and remove the power plug from the receptacle for extra
safety.
17. Whenever you connect/remove the power connector or the like, be sure to turn OFF the power switch
beforehand.
SC-810 for JUS

JUKI SC-810 Specifications

General

Brand	JUKI
Model	SC-810
Category	Sewing Machine
Language	English