To Next Page

To Previous Page

E 17

0602.GB

6 Keyboard (CANCODE) (o)

The keyboard is provided with a key switch function. It is equipped with a 10-key

numeric keypad and two special keys. After entering the correct code the control

circuit is switched on.

6.1 Functions

The keyboard can only administer one master code and 600 operator codes. It is

possible to assign a unique code to each truck. Only operator who know this code can

use the truck. Alternatively, you can assign a unique code to each driver. All operator

codes that are to be enabled for this truck must be stored in the keyboard.

When shipped to the customer one operator and one master code is factory-set

(2580 and 7295).

Change the master and operator codes when setting the truck into operation for the

first time!

All possible codes are preset to one length (4, 5, or 6 digits). The length of the

operator code is predefined by the length of the master code. The code is

automatically checked after the corresponding number of keys is pressed.

The travel parameters for the operating mode can only be adapted in master mode.

Moreover, the master mode permits setting the battery type and the special functions.