F 9
1001.GB
6.3 Check hydraulic oil level
– Prepare the truck for servicing and maintenance operations (refer to chapter F, sec-
tion 6.1).
– Open the front hood (see section 6.2).
– Check the hydraulic oil level of the hydraulic tank (see section 5).
A
There are markings on the hydraulic tank (see section 5). The oil level must be chek-
ked with the lifting device being lowered.
– If required, top up with hydraulic oil with the required characteristics
(see section 6.3; see table).
A
Mounting is performed in reverse order.
6.4 Check the transmission oil level
– Prepare the truck for servicing and maintenance operations (see section 6.1).
– Open the front hood (see section 6.2).
– Loosen 2 x screws (3) using the key (4).
– Check gear-oil level - oil level must reach the filler neck
(see section 5).
– If required, top up with gear oil with the required characteristics (see section 5.1).
– Mounting is performed in reverse order.
Marking Litre Lifting heights (h
3
)
ZT ZZ DZ
4 ca. 8,3 --> 5300
3 ca. 8,0 - > 4100 < 5300
2 ca. 6,8 > 3100 > 2800 -
1 ca. 5,1 < 3100 < 2800 -
F 9
1001.GB
6.3 Check hydraulic oil level
– Prepare the truck for servicing and maintenance operations (refer to chapter F, sec-
tion 6.1).
– Open the front hood (see section 6.2).
– Check the hydraulic oil level of the hydraulic tank (see section 5).
A
There are markings on the hydraulic tank (see section 5). The oil level must be chek-
ked with the lifting device being lowered.
– If required, top up with hydraulic oil with the required characteristics
(see section 6.3; see table).
A
Mounting is performed in reverse order.
6.4 Check the transmission oil level
– Prepare the truck for servicing and maintenance operations (see section 6.1).
– Open the front hood (see section 6.2).
– Loosen 2 x screws (3) using the key (4).
– Check gear-oil level - oil level must reach the filler neck
(see section 5).
– If required, top up with gear oil with the required characteristics (see section 5.1).
– Mounting is performed in reverse order.
Marking Litre Lifting heights (h
3
)
ZT ZZ DZ
4 ca. 8,3 --> 5300
3 ca. 8,0 - > 4100 < 5300
2 ca. 6,8 > 3100 > 2800 -
1 ca. 5,1 < 3100 < 2800 -