JVC ca-mx55mbk User Manual

CA-MX55MBK |
DISC INTRO mode
Play
the
first
track
of
each
of
the
discs
in
the
CD
Automatic
Changer
from
the
disc
on
Disc
No.1
to
6,
for
15
seconds.
INTRO mode
Play
the
beginning
of
each
track
of
the
discs
in
the
CD
Automatic
Changer
from
the
disc
on
Disc
No.1
to
6,
for
15
seconds.
4.
Press
the
PLAY/PAUSE
button
on
the
CD
Automatic
Changer
or
Play
button
on
the
Remote
Controller.
ce
*
Each
track
will
be
played
for
15
seconds
in
the
mode
you
selected.
Notes:
*
When
you
press
the
ltd
or
PP!
button
in
the
INTRO
mode,
this
mode
will
be
canceled,
and
tracks
will
be
played
as
follows.
if
you
press
the
K€
button,
the
currently
selected
track
will
be
played
from
the
beginning
in
the
CONTINUOUS
mode.
If
you
press
the
PPI
button,
the
track
following
the
currently
selected
track
is
played
in
the
CONTINUOUS
mode.
If
you
hold
down
the
Ht
or
PPI
button,
the
manual
search
function
will
be
available,
and
you
can
have
fast-rewind
or
fast-forward.
+
{fyoupress
the
Disc
button
on
the
CD
Automatic
Changer
in
the
INTRO
mode,
or
if
you
press
the
DISC
button
on
the
Remote
Controller,
then.
select
a
disc
with
numeric
keys.
This
will
cancel
the
INTRO
mode,
and
tracks
will
be
played
in
the
CONTINUE
mode,
starting
from
the
first
track
of
the
disc.
+
Ifyou
press
the
CD
10KEY
button
on
the
Remote
Controller,
select
a
disc
with
numeric
keys
while
playing
in
the
INTRO
mode,
the
INTRO
mode
will
be
canceled,
and
tracks
will
be
played
in
the
CONTINUE
mode
from
that
track.
To cancel the INTRO play
4.
Press
the
STOP/CANCEL
button
on
the
CD
Automatic
Changer
or
the
Stop
button
on
the
Remote
Controller.
mm
2.
Press
the
INTRO
button
and
turn
the
Indicator
off.
Note:
+
Ifyou
press
the
STOP/CANCEL
button
on
the
CD
Automatic
Changer
or
the
Stop
button
on
the
Remote
Controller,
and
press
the
PLAY
MODE
button,
the
INTRO
modewillbe
canceled,
andthe
CONTINUOUS
mode
will
change
to
the
PROGRAM
mode.
Programmed Play
In
PROGRAM
mode
32
steps
can
be
programmed
to
play
in
any
desired
~
order
from
the
6
discs
loaded
into
the
magazine.
Press
the
PLAY
MODE
button
on
the
CD
Automatic
Changer.
if
you
use
the
Remote
Controller,
press
the
CD
CHANGER
button
and
then
press
the
PRGM
button.
The PROGRAM indicator lights.
1.
Press
the
STOP/CANCEL
button.
This
puts
the
CD
Automatic
Changer
in
STOP
mode.
PRGM
2.
Press
the
PLAY
MODE
button
on
the
CD
Automatic
Changer
and
select
the
PROGRAM
mode.
The
PROGRAM
indicator
lights.
12
14 (No. 20342)
3.
Press the DISC button and select a disc.
The AL indicator flashes on the display.
O- O- O-
O- O- O-
if you use the Remote Controller, press the CD CHANGER button and
then specify one of 1 to 6 with numeric keys.
1 2 3
Doc
The AL indicator shows that all the tracks on the selected disc have
been selected. If you press the MEMORY button while the AL indicator
is flashing, all the tracks on the disc are programmed.
GD CHANGER
. Press the 4 or >>I button and select a track.
The step and the selected track flash on the display.
ac
ifyou use the Remote Controller, press the CD 10 KEY button, and then
specify a track with numeric keys.
1 2 3
Ca a
Co GE
CONTINUE _PRGM
Deco
Select a track while the AL. indicator is flashing on the display.
CD 10KEY
. Press the MEMORY button on the CD Automatic Changer. The
step and the selected track will light on the display. .
The CD Automatic Changer will wait for selection of the next track.
MEMORY
Cl
. Select a track by repeating steps 3 to 5.
You can program up to 32 tracks.
Perform steps 3 to 5 while the display is flashing. If the display stops
flashing and lights as follows, perform step 3 and subsequent steps
again.
1
so
ee
ee
mw TE 0:00
Press the PLAY/PAUSE button on the CD Automatic Changer.
Playback begins with the first track in the program.

JVC ca-mx55mbk Specifications

General

Brand	JVC
Model	ca-mx55mbk
Category	CD Player
Language	English