JVC ca-mx55mbk User Manual

| CA-MX55BK
Checking the Program
You can check the programmed sequence of playback to determine which
tracks will be played in which order.
Note:
¢ The program contents cannot be displayed during playback. Press the
STOP/CANCEL button if the CD Automatic Changer is in play mode.
1. Press the CALL button once on the CD Automatic Changer.
CAL
a)
The first track in the program are displayed, along with its sequence
number.
For example:
oe
bs TRACK
ee @
4 8 & PROGRAM 5 = " ff: f] f]
This display shows that track 6 on Disc No. 2 is played first.
2. Press the CALL button repeatedly.
The rest of the tracks in the program are displayed, along with their
sequence numbers.
Listening to Programmed Tracks Repeatedly
1. Press the REPEAT button to Iisten to the programmed sequence
of playback repeatedly.
REPEAT
ca
2. Then press the PLAY/PAUSE button.
Updating the Program
Adding Tracks to the Program
*
You
cannot
add
any
track
to
the
program
while
playing.
If
the
CD
Automatic
Changer
is
playing,
press
the
STOP/CANCEL
button.
Perform
steps
3
to
5
in
the
section
"Programmed
Play
on
page
12”.
Program
modification
*
You
cannot
modify
the
program
while
playing.
If
the
CD
Automatic
Changer
is
playing,
press
the
STOP/CANCEL
button.
1.
Hold
down
the
CALL
button
until
the
track
or
step
to
be
modified
appears.
Select
them
while
the
step
is
flashing
on
the display.
The
track
and
step.
appear
on
the display,
and
the
step
flashes.
CALL
Ea
2. Select the Disc. No. and track.
The track and step appear on the display, and the step flashes.
+ {fthe display stops flashing and lights, perform step 1 and subsequent
steps again.
3. Press the MEMORY button.
Deleting Tracks from the Program
« The program contents cannot be deleted during playback. Press the
STOP/CANCEL button if the CD Automatic Changer is in play mode.
1. Press the CALL button.
Press the CALL button until the track or step to be deleted appears on
the display.
2. Press the STOP/CANCEL button on the CD Automatic Changer.
The track being displayed will be deleted.
big delete all programmed steps:
Set the CD Automatic Changer to the Stop mode, press the STOP/
CANCEL button and delete all programmed steps.
* Switch the power off.
¢ The program remains in memory until you switch the power off. To
program new tracks, first turn the power off the delete the whole
program.
To cancel the PROGRAM mode:
« Set the CD Automatic Changer to the Stop mode, press the PLAY
MODE button, and select another mode.
Random Play
In RANDOM mode, the CD Automatic Changer selects and plays tracks at
random, from among the 6 discs in the magazine.
* Selections can be made so that each track would be played only once.
1. Press the PLAY MODE button and select the random mode.
The RANDOM indicator lights.
2. Press the PLAY/PAUSE button on the CD Automatic Changer or
CD CONTROL P button on the Remote Controller.
CD Automatic Changer starts playing tracks at random.
* Ifyousetthe CD Automatic Changer to the REPEAT mode by pressing
the REPEAT button, even after all tracks have been played once, the
CD Automatic Changer will again select and play at random to continue
the random playback.
3. To cancel random playback, press the STOP/CANCEL button.
To cancel the RANDOM mode:
¢ Set the CD Automatic Changer to the Stop mode, press the PLAY
MODE button, and select another mode.
13
(No. 20342) 15

JVC ca-mx55mbk Specifications

General

Brand	JVC
Model	ca-mx55mbk
Category	CD Player
Language	English