To Next Page

To Previous Page

Getting Started Preparation Basic Operation Settings Troubleshooting Others

ENGLISH

Cleaning and Replacing the Filter

A Remove the inner filter

B Clean the filter

C Reinstall the inner filter

Clean the filter regularly or air intake efficiency may deteriorate and malfunction may occur.

z Wash the filter with water and dry it in a shaded area.

z In extremely soiled cases, use of a neutral detergent is recommended.

Put on rubber gloves when using a neutral detergent.

z After washing the filter with water, make sure that it is completely dry before

reinstalling. Otherwise, electric shocks or malfunctions may occur.

z Do not clean the filter with a vacuum cleaner or air duster. The filter is soft

and may be damaged.

Lift up while pushing the claw

z Pull the power plug from the power

outlet.

If the filter is damaged or too

dirty to be cleaned

Replace with a new filter. A dirty

filter will dirty the internal parts of

the unit and cause shadows on the

video image.

z To purchase a new filter or when

there is dirt in the internal parts,

consult your authorized dealer.

 Inner Filter

Part No. : LC32058-002A

CAUTION

MEMO

Check that the left and right

claws are locked onto the unit

DLA-HD1D_EN.book Page 45 Tuesday, January 30, 2007 2:54 PM

Other manuals for JVC DLA-HD1

Questions and Answers:

Need help?

Do you have a question about the JVC DLA-HD1 and is the answer not in the manual?

General