48 EN
Master Page: Left
GR-DVP7-5EG_37-79.fm Page 48
Sound input
E-Mail Clip Recording
Resetting menu settings
DISPLAY ( : Factory-preset)
Display setting
Date and time display setting
Time code setting
Clock adjustment
SOUND IN MIC/AUX Enables sound input from camcorder’s stereo microphone, when Audio
Dubbing (墌 pg. 70) is executed. “MIC” or “AUX” appears on the Audio
Dubbing screen depending on the sound input you use.
D.SOUND Enables sound effect input recorded on the provided memory card, when
Audio Dubbing (墌 pg. 71) is executed. “D.SOUND” appears on the
Audio Dubbing screen.
E-CLIP REC 160 x 120 Refer to “E-Mail Clip Recording” (墌 pg. 60).
240 x 176
CAM RESET CANCEL Does not reset all settings to the factory-preset.
EXECUTE Resets all settings to the factory-preset.
Display Menu
ON SCREEN LCD Keeps the camcorder’s display (except the date, time and time code) from
appearing on the connected TV screen.
LCD/TV Makes the camcorder’s display appear on screen when the camcorder is
connected to a TV.
DATE/TIME OFF The date/time does not appear.
AUTO Displays the date/time for approx. 5 seconds in the following cases:
● When the Power Switch is set from “OFF” to “A” or “M”.
● When playback starts. The camcorder displays the date/time when
scenes are recorded.
● When the date is changed during playback.
ON The date/time is always displayed.
TIME CODE
OFF Time code is not displayed.
ON Time code is displayed on the camcorder and on the connected TV.
Frame numbers are not displayed during recording.
CLOCK ADJ. Allows you to set the current date and time. (墌 pg. 15)
RECORDING MENUS (cont.)
GR-DVP7-5EG_37-79.fm Page 48 Friday, March 1, 2002 9:55 AM
To Next Page
Loading...
Need help?
General
