EasyManuals Logo
Home>JVC>Camcorder>GR-DVP5

JVC GR-DVP5 User Manual

JVC GR-DVP5
104 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #52 background imageLoading...
Page #52 background image
52 EN
Master Page: Left-Heading0
GR-DVP7-5EG_37-79.fm Page 52
FEATURES FOR RECORDING
This feature lets you record still images that look like
photographs onto a tape.
1 Set the VIDEO/MEMORY Switch to “VIDEO”.
2 Set the Power Switch to “M” while pressing down
the Lock Button located on the switch.
3 Open the LCD monitor fully, or pull out the
viewfinder fully.
4 Set “SNAP MODE” to the desired mode.
( pg. 38, 44)
5 Press SNAPSHOT.
TheO” indication appears and a still
image will be recorded for approx. 6 seconds,
then the camcorder re-enters the Record-
Standby mode.
You can perform Snapshot also during
recording. A still image will be recorded for
approx. 6 seconds, then the normal recording
resumes.
Regardless of the Power Switch position (“A
or “M”), Snapshot recording takes place using
the selected Snapshot mode.
NOTES:
To remove the shutter sound, refer to “BEEP” on
page 47.
If Snapshot recording is not possible, the “O
indication blinks when SNAPSHOT is pressed.
If Program AE with special effects ( pg. 41) is
engaged, certain modes of Program AE with
special effects are disabled during Snapshot
recording. In such a case, the icon blinks.
If SNAPSHOT is pressed when “DIS” is set to
“ON” ( pg. 45), the Stabiliser will be disabled.
During playback as well, all snapshot modes
except Nega mode are available when
COPY” is set to “OFF” in VIDEO Menu.
( pg. 50) However, the shutter sound is not
heard.
During Snapshot recording, the image displayed
in the viewfinder may be partially missing.
However, there is no effect in the recorded image.
When the S/AV/Editing cable is connected to the
S/AV connector, the shutter sound is not heard
from the speaker, however it is recorded onto the
tape.
Motor Drive Mode
Keeping SNAPSHOT pressed in step 5 provides an
effect similar to serial photography. (Interval
between still images: approx. 1 second)
The Motor Drive mode is disabled when “REC
SELECT” is set to “ / ”. ( pg. 38, 49)
Snapshot (For Video Recording)
Power Switch
Lock Button
VIDEO/MEMORY
Switch
MENU Button
SET/SELECT
Button
+, – Button
SNAPSHOT Button
GR-DVP7-5EG_02-08.book Page 52 Thursday, February 28, 2002 11:39 AM

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the JVC GR-DVP5 and is the answer not in the manual?

JVC GR-DVP5 Specifications

General IconGeneral
BrandJVC
ModelGR-DVP5
CategoryCamcorder
LanguageEnglish

Related product manuals