6 EN
Master Page: Left
GR-DVP7-5EG_02-08.fmPage 6
How To Attach The Grip Belt
1) Remove the pad and separate the two straps.
2) Thread one end of the strap g through the eyelet,
then pass the other end through the loop.
3) Repeat the same procedure to attach the strap h
to the other eyelet.
4) Connect the strap g and h and thread the strap
h through the buckle, then adjust the grip.
(墌 pg. 12)
5) Attach the pad.
h
g
GR-DVP7-5EG_02-08.book Page 6 Thursday, February 28, 2002 11:39 AM
To Next Page
Loading...
Need help?
General
