JVC GY-HM250UG User Manual

Initial Settings
When the power
is first turned on, the Initial Setting
screen for performing the initial settings in the
camera recorder appears.
Set the date/time of the built-in clock in the [Initial
Setting] screen.
All operations are disabled until initial settings are
complete.
.
Memo :
0
It is recommended
to use the AC adapter as the
power supply.
0
Attach the lens cap.
1
Hold down the lock button (blue) at the
center of the [POWER ON/OFF] switch to set
to “ON”.
A language selection screen appears.
0
For U models
.
Español
Français
English
Language
0
For E models
.
Pусский
Español
Italiano
Deutsch
Français
English
Language
Memo :
0
The menus and messages on the screen of the
LCD monitor or viewfinder are displayed in the
selected language.
2
Select a language using the cross-shaped
button (JK), and press the Set button (R).
The Initial Setting screen appears.
.
3
Ensure the lens cap is attached, and press
the Set button (R).
0
Self-diagnosis starts.
0
A progress bar appears, and “Complete
Diagnosis
” appears when the diagnosis is
complete.
.
Memo :
0
It takes about 6 minutes to complete the
diagnosis. During the diagnosis, do not operate
or turn off the camera recorder.
36
Initial Settings
Preparations

JVC GY-HM250UG Specifications

General

Brand	JVC
Model	GY-HM250UG
Category	Camcorder
Language	English