33
ENGLISH
SOUND ADJUSTMENTS
1
Select the item you want to adjust.
Each time you press the button,
the adjustable items change as
follows:
Indication To do: Range
FADER* Adjust the front R06 (Rear only)
and rear speaker |
balance. F06 (Front only)
BAL Adjust the left L06 (Left only)
and right speaker |
balance. R06 (Right only)
EX BASS
** Turn on or off the ON
Extended Bass.
|
OFF
WOOFER
*** Adjust the 00 (min.)
subwoofer output |
level. 12 (max.)
VOL ADJ**** See “To adjust –12 (min.)
the input level of |
each source” on +12 (max.)
the right column.
VOLUME Adjust the volume. 00 (min.)
|
50 (max.)
* If you are using a two-speaker system, set the
fader level to “00.”
** The richness and fullness of the bass sound is
clearly maintained regardless of how low you set
the volume – Extended Bass.
*** This takes effect only when a subwoofer is
connected.
**** Not adjustable when the source is FM.
“FIX” will appear.
Adjusting the sound
You can adjust the sound characteristics to your
preference.
2
Adjust the level.
Note:
Normally, the control dial works as the volume
control. So you do not have to select “VOLUME” to
adjust the volume level.
To adjust the input level of each source
You can adjust the input level of each source
except FM, and store it in memory.
By adjusting the input level properly to match it
to the FM sound level, you will not need to
adjust the volume level each time you change
the source.
To decrease the level.
To increase the level.
VOLUME
(Subwoofer)
FADER*
(Fader)
BAL
(Balance)
WOOFER***
(Extended Bass)
EX BASS**
(Volume Adjustment)
VOL ADJ****
EN33_35SH909_707R[E]f.pm5 1/23/02, 11:29 AM33
To Next Page
Loading...
Need help?
General
