46
ENGLISH
CD CHANGER OPERATIONS
Playing CDs
Select the CD automatic changer (CD
CHANGER).
When you select a source,
the power automatically
comes on.
Each time you press the
button, the source changes
as follows:
* Without connecting the DAB tuner or CD
changer, you cannot select it as the source to
play.
** If a disc is not in the loading slot, you
cannot select CD as the source to play.
*** When “LINE IN” or “AUX IN” is set to
“OFF,” you cannot select it as the source to
play. (See page 39).
We recommend that you use one of the CH-X series
with your unit.
If you have another CD automatic changer,
consult your JVC IN-CAR ENTERTAINMENT
dealer for connections.
• For example, if your CD automatic changer is one of
the KD-MK series, you need a cord (KS-U15K) for
connecting it to this unit.
Before operating your CD automatic changer:
• Refer also to the Instructions supplied with your
CD changer.
• If no discs are in the magazine of the CD
changer or the discs are inserted upside down,
“NO DISC” will appear on the display. If this
happens, remove the magazine and set the
discs correctly.
• If “RESET 1” – “RESET 8” appears on the
display, something is wrong with the
connection between this unit and the CD
changer. If this happens, check the connection
and make sure the cords are connected firmly.
Then, press the reset button of the CD
changer.
Elapsed
playing time
Disc number (then
changes to the clock
time when “CLOCK” is
set to “ON”).
AM TUNER (AM)
FM TUNER (FM)
DAB TUNER (DAB)*
LINE INPUT (LINE)***
CD CHANGER (CDCH)*
CD**
AUX INPUT (AUX)***
Back to the beginning
Track number
EN46_48SH909_707R[E]f.pm5 1/23/02, 11:37 AM46
To Next Page
Loading...
Need help?
General
