JVC KW-AVX810 User Manual

USB operations
You can connect a USB mass storage class device such as a USB memory, Digital Audio Player, portable HOD, etc. to
the unit.
• You can also connect the iPod to the USB terminal of the unit. For details of the operations, 1& pages 48 to 50.
• Connect a USB device.
USB cable from the rear of the unit
• You cannot connect a computer to the USB ( ~)
terminal of the unit.
The source changes to "USB" and playback starts.
This unit can play JPEG/MPEG1 IMPEG2*1 IMP3/WMAI
WAV I AAC*2 files stored in USB mass storage class
device.
• You can operate the USB device in the same way you
operate the files on discs. (1& pages 18 to 27)
• All tracks in the USB device will be played repeatedly
until you change the source.
• Make sure all important data has been backed up.
*1 Except for MPEG2 files recorded by JVC Everio
camcorder (extension code <.mod».
*2 This unit can play back AAC files encoded using
iTunes. This unit cannot play back FairPlay-encrypted
files.
• Avoid using the USB device if it might hinder your
safety driving.
• Do not pull out and attach the USB device
repeatedly while "Now Reading ... " is flashing on
the monitor screen.
• Do not start the car engine ifa USB device is
connected.
• Stop playback before disconnecting a USB device.
• Do not leave a USB device in the car, expose to
direct sunlight, or high temperature to avoid
deformation or cause damages to the device.
• For more details about USB operations, 1& page
69.
32

JVC KW-AVX810 Specifications

General

Brand	JVC
Model	KW-AVX810
Category	Car Receiver
Language	English