JVC KW-AVX810 User Manual

Changing HD Radio reception
mode _
While receiving an HD Radio broadcast, the unit tunes
to digital or analog audio automatically due to the
receiving condition.
1
• You can also use MENU on the monitor panel.
Tuning in to stations with
sufficient signal strength __
This function works only for FM bands. Once you have
activated this function (selected <Local>), it always
works when searching for FM stations.
1
• You can also use MENU on the monitor panel.
2
3
2
3
Analog
Digital
Auto
Tuning to analog audio only
Tuning to digital audio only
Switch between digital and
analog audio automatically
Only stations with sufficient signal strength will be
detected.
• The DX indicator goes off, then the LO indicator
lights up.
• If no sound can be heard from the selected setting,
change the setting to <Analog> or <Digital>.
•
The setting automatically changes to <Auto> if you
tuned in to or change to another station, or if you
turned off the power.
• This setting cannot take effect for the conventional
FM/AM stations.
• If the radio station forces the reception mode to
digital, the DIGITAL indicator flashes.
47
EXTERNAL DEVICES

JVC KW-AVX810 Specifications

General

Brand	JVC
Model	KW-AVX810
Category	Car Receiver
Language	English