JVC KW-AVX810 User Manual

Using the Bluetooth cellular phone _
IGi' page 38
-++-- Bluetooth icon lights
up when the adapter
is connected.
-++-- *1
iii!!: .,
~B I - "" .1,': l=o:":JV:,,:,c:,,O~-==-':==::::::::::=""'::::::::::"'1J
*2
Adjusts the volume of the incoming calls.*3
Selects the registered device
("NEW DEVICE" appears when a new device can be registered.)
Hold: Activates <Voice Dialing> function
Displays <Dial Menu> screen.
[ .... ~l
Sound mode
(1Gi' page 55)
Status of the device
Signal strength/Battery
remainder (only when
the information comes
from the device)
*1 When a cellular phone with audio function is connected, I appears.
*2 This button appears when the Bluetooth Adapter is connected.
*3 This adjustment does not affect the volume level of the other sources.
o
•
•
•
Press [SOURCE], then press [Bluetooth PHONE]. (1Gi' page 11)
• You can also use SOURCE on the monitor panel. Press it repeatedly.
Press[~].
• You can also use MENU on the monitor panel.
Press [Bluetooth].
Establish the connection with a device, then make a call (or settings using <Bluetooth>
menu). (1Gi' pages 64 and 65)
When a call comes in •••
The source is changed to "Bluetooth PHONE"
automatically.
Name and phone number (if acquired)
When <Auto Answer> is activated ...
The unit answers the incoming call automatically.
(1& page65)
When <Auto Answer> is deactivated •••
To answer the incoming call
• Press the message displayed on the touch panel.
• Press any button on the monitor panel (except <.9/1
IATT orVOl +1-).
To end the call
• Hold the message displayed on the touch panel.
• Hold any button on the monitor panel (except <.9/1
IATT or VOL +1-).
• You can adjust the microphone volume. (1& page 65)
36

JVC KW-AVX810 Specifications

General

Brand	JVC
Model	KW-AVX810
Category	Car Receiver
Language	English