JVC KW-AVX820 User Manual

*11 The REVERSE GEAR SIGNAL lead connection is required. See Installation/Connection Manual. The rear view through
the camera appears on the screen in <Full> aspect ratio (regardless of the aspect ratio setting) when you shift the
gear to the reverse (R) position. When you press DISP on the monitor panel, or when you shift the gear to another
position other than the reverse (R) position, the rear view screen is cleared.
*12 While the pictures through the camera are shown on the monitor, no message will be displayed.
* 13 Not selectable when the component connected to the CD changer jack is selected as the source.
*14 The name of the component detected through the CD changer jack is shown.
*15 The TEL MUTING lead connection is required. See Installation/Connection Manual .
Ex.: When storing into <User2>.
3 Make the setting, then store.
• Storing your own adjustments
You can store your adjustments into <Userl >,
<User2>, and <User3>.
1 Display <AV Menu> screen.
Ir!~ i
r
2 Display <Equalizer> screen.
Makes adjustments by
moving each bar directly.
Preset equalizing values
Moves to the other 6
sound modes.
Selects a preset sound mode suitable to the music
genre .
• Flat (Initial), Hard Rock, R&B, Pop, Jazz, Dance,
Country, Reggae, Classic, Userl, User2, User3
AV MENU
19

JVC KW-AVX820 Specifications

General

Audio system	DTS/Dolby Digital/MPEG
MP3 playback	Yes
Audio formats supported	AAC, MP3, WAV, WMA
Tuner type	HS-IV
AM band range	530 - 1710 kHz
FM band range	87.5 - 107.9 MHz
Preset stations quantity	24
Impedance	4 Ω
Product color	Black
Audio output channels	4.0 channels
Equalizer bands quantity	7
Maximum power per channel	50 W
Signal-to-Noise Ratio (SNR)	95 dB
Display type	LCD
Display diagonal	7 \
Digital audio optical out	1
I/O ports	1 x USB, 1 x Composite Video Out

Weight and Dimensions

Weight	3300 g
Dimensions (WxDxH)	188 x 10 x 117 mm