4
INITIAL SETTINGSINITIAL SETTINGS
Initial setup
When you power on the unit for the first time or
reset the unit, the initial setting screen appears.
• You can also change the settings on the
<Settings> screen. (Page55)
1 Perform the initial settings.
*
<Demonstration>
(Page56)
Activate or deactivate the
display demonstration.
<Language>
(Page57)
Select the text language
used for on-screen
information.
• Set <GUI Language>
to display the operation
buttons and menu items
in the selected language
([Local]) or English
([English]).
<Angle>*
(Page7)
Adjust the panel angle.
<iPod Setup>
(Page21)
Select the connection
method of iPod/iPhone.
<Rear Camera>
(Page35)
Configure the settings to
display the picture from
the connected rear view
camera.
<User
Customize>
(Page51)
Change the display design.
2 Finish the procedure.
The Home screen is displayed.
* Only for KW-V420BT .
Clock settings
1 Display the Home screen.
On the monitor panel:
KW-V420BT KW-V320BT KW-V220BT
KW-V120BT
2 Display the <Clock> setting screen.
• You can also display the <Clock> setting
screen by touching the clock area on the
Home screen.
2016KW-VEntryK.indb42016KW-VEntryK.indb4 2015/09/2510:482015/09/2510:48