ENGLISH 5
INITIAL SETTINGSINITIAL SETTINGS
3 Set the clock time.
<Radio Data
System>
Synchronizes the clock time with
FM RBDS.
<OFF> Sets the clock manually. (See
below.)
When selecting <OFF>:
Adjust the hour (1), then adjust the minute (2).
• Press [Reset] to set the minute to “00”.
4 Finish the procedure.
BASICSBASICS
Component names and functions
VCaution on the volume setting:
Digital devices produce very little noise compared
with other sources. Lower the volume before
playing these digital sources to avoid damaging
the speakers by sudden increase of the output
level.
KW-V420BT
1 Screen (touch panel)
2 Monitor panel*
3 VOLUME –/+ button
Adjusts the audio volume. (Page 7)
4 ATT button
Attenuates the sound. (Page 7)
5 HOME/ button
• Displays the Home screen. (Press) (Page 9)
• Turns on the power. (Press) (Page 7)
• Turns off the power. (Hold) (Page 7)
6 FNC/
button
• Pops up the short-cut menu. (Press)
(Page 11)
• Activates the voice dialing. (Hold) (Page 43)
7 DISP/DISP OFF button
• Switches the screen. (Press)
– The screen switched to depends on the
<Navigation Input> setting (Page 56).
• Turns off the screen. (Hold) (Page 8)
• Turns on the screen. (Hold) (Page 8)
8 M (Eject) button
Ejects the disc. (Tilts the monitor panel fully.)
(Page 12)
9 Reset button
Resets the unit. (Page 3)
* You can change the color of the buttons on the monitor panel.
(Page 51)
2016KW-VEntryK.indb52016KW-VEntryK.indb5 2015/09/2510:482015/09/2510:48
To Next Page
Loading...
Need help?
General
Weight and Dimensions
