JVC LT-22HG45E Service Manual

HOTEL MODE FUNCTION
To set the Hotel mode, please follow the steps below.
1. Press the MENU ---> 1147 button on the remote control.
2. Press the DOWN button on the remote control,
Hotel mode On <>
3. Select the "Setup" menu , then press ENTER button.
Source Lock >>
4. Select the "Hotel Mode" menu, Select "ON".
Default Source Off <>
5. The Hotel mode setting menu will appear.
Channel Type All <>
6. Using the UP/DOWN button on the remote control,
Default Program 1 <>
select the desired mode. Then press the ENTER button
.
Max Volume
100
7.
Default Volume
50
set the mode to desired setting.
Clone to USB >>
8. The Hotel mode has now been set up.
Restore from USB >>
To reset the Hotel mode, please follow the steps below.
1. Press the MENU ---> 1147 button on the remote control.
2. Press the DOWN button on the remote control,
3. Select the "Setup" menu , then press ENTER button.
4.
Select the "Hotel Mode" menu.
Using the LEFT/RIGHT button on the remote control,
4.
Select the "Hotel Mode" menu.
5. The setting items has now been returned to initial value.
ANTENNA/CABLE/AV
COMPONENT/SCART/ 1 Setting of the CH if select "Default Source" to TV input.
PC/HDMI/USB
21 Setting of the CH if select "Default Source" to TV input.
100 Setting of the maximum volume value.
50 Setting volume at Power on.
Setting of the Hotel Mode return factory setting.
Setting of the Password.
Default Program
Default Volume
Restore from USB
Clone to USB
Setting item Setting value
ANTENNA/CABLE/AV
PC/HDMI/USB
COMPONENT/SCART/
ANTENNA/CABLE/AV
PC/HDMI/USB
COMPONENT/SCART/
Setting Input skip, combine with "Default Source".
Setting Input Source, combine with "Source Lock"
If select "Source Lock" for this function disappear.
FUNCTION
Channel Type
Max volume 0~100
1~21
0~50
Initial value
Source Lock
OFFDefault Source

JVC LT-22HG45E Specifications

General

Brand	JVC
Model	LT-22HG45E
Category	LED TV
Language	English