13
Other convenience functions
You can change the default settings to convenience use.
Selected Items Setup hint
CHANNEL See page 9-10.
PICTURE
Picture Mode
Dynamic Enhanced picture contrast and sharpness (factory-set)
Standard Standard picture quality (factory-set)
Mild Intended for bad-quality signals (factory-set)
User Your personal preferences
Contrast / Brightness / Color / Tint / Sharpness
(available only when you selected “User” at
Picture Mode)
You can adjust the picture to your preference.
Tint is available in NTSC-signal mode or Component/
HDMI-signal with 60Hz.
Sharpness is not effective in DVI signal (PC format).
•
•
Color Temperature Cool (Bluish) / Medium (Neutral) / Warm (Reddish)
Noise Reduction Sometimes it is not possible to input a high-quality HD
signal. The actual signal input is too small and noisy,
e.g. a video film in letterbox format, or a noisy analogue
cable TV signal. This feature can slightly reduce
interferences caused by the faulty input signal.
Off / Low / Middle / High
Backlight You can use the Backlight feature to adjust the screen
brightness for improved picture clarity.
SOUND
Sound Mode You can change the sound mode setting. If you select
“User”, you can change the setting of Treble and Bass
and TV memorizes your setting.
Standard / Music / Movie / Sports
/ User
Treble / Bass / Balance
(Treble / Bass are available only when you
selected “User” at Sound Mode)
You can adjust the sound quality to your preference.
Auto Volume This will automatically adjust volume so each channel
and input has the same average volume level.
On / Off
Surround The Surround-Sound feature processes the audio signal
to expand the listening field wider and deeper to create
a ‘pseudo surround-sound’ from the TV’s speakers.
The feature works with stereo signals from TV broadcast
or AV input.
On / Off
3IZ0101C_EN.indd 133IZ0101C_EN.indd 13 10/21/11 12:05:38 PM10/21/11 12:05:38 PM
To Next Page
Loading...
Need help?
General
