JVC LT-32G4 User Manual

5
Location of controls
Description of Indicators and Controls
1. Remote sensor
2.
(Power)-button: Preparation: Connect AC Cord to AC110~240V, 50/60Hz.
a) If standby-LED is red, you may power-off. To power-off, press power-button 1x and release.
For confirmation, standby-LED will change to dark. Power-on by remote control is not available.
b) If standby-LED is off, you may power-on. To power-on, press power-button 1x and release.
For confirmation, standby-LED will change to green (LT-32G4/LT-32G40:blue).
3. CH
/ /▲/▼ buttons: Press to change to a higher numbered channel set into memory. Press
to change to a lower numbered channel set into memory. In Menu: Setting.
4. VOL+/–/◀/▶ buttons: To control volume / In Menu: Setting.
5. MENU button: To display the menu screen.
6. INPUT/ENTER button: Select input mode. Press INPUT/ENTER. Then press ▲/▼ to select input
source. In Menu : Using as ENTER button.
7. Power indicator: The LED indicator lights up red in standby mode, and green (LT-32G4/LT-32G40:
blue) in the power ON mode.
8. Loudspeakers
For complete disconnection from the network, remove the supplied AC Cord from the socket.
17
1
7
5
8
4
3
2
1
6
7
LT-32A4
(LT-40Z40)
6
5
3
4
2
(LT-40Z40)
5
4
3
2
6
(LT-32G4/LT-32G40)
(LT-32G4/LT-32G40)
3IZ0101C_EN.indd 53IZ0101C_EN.indd 5 10/21/11 12:05:31 PM10/21/11 12:05:31 PM

JVC LT-32G4 Specifications

General

Brand	JVC
Model	LT-32G4
Category	LCD TV
Language	English