17
PC connection
Follow these steps: On your PC monitor choose a resolution of 1920 × 1080 (LT-32A4/LT-32G4: 1360 × 768)
at 60Hz and save this configuration. Shut down your PC and connect the shut off LCD TV.
Use a screensaver to avoid burning-in of static picture content.
Select PC input
Switch on the LCD-TV.
Select the PC mode (see page 9).
Supported PC resolutions
resolution fps (Hz)
640x480 60
800x600 60
1024x768 60
1280x720 60
1280x768 60
1360x768 60
1280x1024 60
1440x900 60
1920x1080 60
Use a PC-VGA cable (not supplied) to connect the LCD-Monitor
to your PC. Make the connections carefully so as not to break or
bend the contacts inside the plug.
VGA Cable (not supplied)
Audio cable (not supplied)
TV (Rear view)
To AUDIO PC/
DVI input
PC
To PC input
Note:
If no signal or a signal with a non-supported resolution is connected,
NO SIGNAL is displayed.
As this LCD-TV is not a PC monitor correct display cannot be
guaranteed for every PC / graphics card.
•
•
Connecting an HDMI or a DVI device to the HDMI input
The HDMI input receives digital audio and uncompressed video from a HDMI equipped device or
uncompressed digital video from a DVI equipped device.
When you connect to a DVI device with a HDMI-to-DVI adapter cable, it only transfers the video signal, so it
is necessary to use separate analogue leads to transfer the audio signals.
Select the HDMI input mode (see P.9).
or
DVI device
HDMI device
To DVI output
Audio cable (not supplied)
HDMI - to - DVI adapter cable
(HDMI type A connector)
(not supplied)
HDMI cable
(type A connector)
(not supplied)
To HDMI output
To AUDIO PC/DVI input
TV (Rear view)
TV (Rear view)
3IZ0101C_EN.indd 173IZ0101C_EN.indd 17 10/21/11 12:05:41 PM10/21/11 12:05:41 PM
To Next Page
Loading...
Need help?
General
