21
Menu Functions
Menu Functions
About the OSD Menus
To access the OSD menu, press MENU.
Using the OSD menu
To access the OSD menu, press MENU on the projector or remote control. It consists of the
following main menus. Check the links after the menu items below to learn more details.
1. PICTURE menu (see page 22)
2. BASIC menu (see page 24)
3. ADVANCED menu (see page 25)
4. SYSTEM menu (see page 26)
5. DISPLAY menu (see page 28)
6. POWER MANAGEMENT menu (see page 29)
7. INFORMATION menu (see page 30)
Available menu items may vary depending on the connected video sources or specified settings.
Menu items that are not available will become grayed out.
• Use the arrow keys ( / / / ) on the projector or remote control to move through the
menu items.
• Use OK to confirm the selected menu item.
Main menu icon
PICTURE
Picture Mode
Brightness
Contrast
Color Temperature
Advanced
e-shift
Exit
Highlight
Sub-menu
Status
Press MENU
to go back to
the previous
window or to
exit.
main menu
Current input signal
Reset Picture Mode
Natural
6500K
Off
HDMI 1
To Next Page
Loading...
Need help?
General
