4
Important safety instructions
Dear Customer,
This apparatus is in conformance with the valid European directives and standards regarding
electromagnetic compatibility and electrical safety.
European representative of JVCKENWOOD Corporation is: JVCKENWOOD Deutschland
GmbH Konrad-Adenauer-Allee 1-11, 61118 Bad Vilbel, GERMANY
Information for Users on Disposal of Old Equipment and Batteries
[European Union only]
These symbols indicate that equipment with these symbols should not
be disposed of as general household waste. If you want to dispose of
the product or battery, please consider the collection systems or
facilities for appropriate recycling.
Notice: The sign Pb below the symbol for batteries indicates that this
battery contains lead.
Important safety instructions
Your projector is designed and tested to meet the latest standards for safety of information
technology equipment. However, to ensure safe use of this product, it is important that you follow
the instructions mentioned in this manual and marked on the product.
1. Please read this user manual before you operate your projector. Keep this manual in a safe place
for future reference.
2. Always place the projector on a level, horizontal surface during operation.
- Do not place the projector on an unstable cart, stand, or table as it may fall and be damaged.
- Do not place inflammables near the projector.
- Do not use if tilted at an angle of more than 10 degrees left to right, nor at angle of more than 15
degrees front to back.
3. Do not store the projector on end vertically. Doing so may cause the projector to fall over, causing
injury or resulting in damage.
4. Do not place the projector in any of the following environments:
- Space that is poorly ventilated or confined. Allow at least 50 cm clearance from walls and free
flow of air around the projector.
- Locations where temperatures may become excessively high, such as the inside of a car with all
windows closed.
- Locations where excessive humidity, dust, or cigarette smoke may contaminate optical
components, shorten the projector’s lifespan and darken the screen.
- Locations near fire alarms.
- Locations with conditions beyond those listed in
"Projector specifications".
5. Do not block the vents while the projector is on (even in standby mode).
- Do not cover the projector with any item.
- Do not place the projector on a blanket, bedding or any other soft surface.
6. In areas where the mains power supply voltage may fluctuate by ±10 volts, it is recommended that
you connect the projector through a power stabilizer, surge protector or uninterruptible power
supply (UPS) as appropriate to your situation.
7. Do not step on the projector or place any objects upon it.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
