Fade.out Muting (FADE MUTING)
You can mute the output with one touch operation.
To muting the output, press the FADE MUTlNG button on the
Remote Control. The output is faded out.
TO release muting, press the FADE MUTING button once
again, The output is faded in to the previous level.
• Afler Fade-out Muting, turning the VOLUME control on the
unit or pressing the VOLUME button on the Remote Control
will increase the volume from MIN. setting.
Reinforcing the Bass Sound
(ACTIVE BASS EX.)
'Ihe richness and fullness of the bass sound is maintained regard-
less of how low you set the w)lume.
You can use this effect only for playback.
TO get the effect, press the ACTIVE BASS EX. (Extension)
button.
'Ihe "BASS" indicator lights up and "ACTIVE BASS EXTEN-
SION" appears on the display.
TO cancel the effect, press the bullon again.
'Ihe "BASS" indicator goes out and "OF1 _' appears on the display.
Emphasizing the sound
(SOUND TURBO)
High and low frequencies are highly boosted.
To get the effect, press the SOUND TURBO button.
'Ihe SOUND TURBO indicator lights up and "SOUND TURBO
ON" appears on the display.
TO cancel the effect, press the button again.
'Ihe SOUND TURBO indicalor goes out and "OFF" appears on
the display.
• Selecting the Sound Turbo function turns the Active Bass EX.
and Sound Mote to off. While the Sound 'Iurbo will be turned
off, if either Active Bass EX. or Sound Mode function is
selected.
Basic Operations
ROCK
POP
CLASSIC
OFF
Boosts low and high frequencies. Good for
acoustic music.
Good for vocal music.
Set for wide and dynamic sound stereo
systems.
No sound effect applies.
Onthe Remote Control
Press the SOUND MODE button until Sound Mode you want ap-
pears on the display.
The Sound Mode indicator thai corresponds to the selected sound
]node blinks.
Each time you press the button, the Sound Mode changes as fol-
lows:
ROCK -_ POP -_ CLASSIC -_ OFF "_ (back to the beginning)
To cancel the effect, press the SOUND MODE button until
"OFF" appears on the display.
The Sound Mode indicator stays lit.
Entering the Number with the
Remote Control (Numeric Keys)
You will use the number keys on the Remole Control 1oenter num-
bers for presetting sta/ions, recalling the preset sta/ions, or pro-
gramming the playing tracks on CDs.
How to enter the number with the number keys is explained here.
Examples:
• To enler number 5, press 5.
• To enler number 15, press +10, then 5.
• To enler number 20, press +10, then I0.
• To enter number 25, press +I0, +10, then 5.
Selecting the Sound Mode
(SOUND MODE)
You can select one of 3 SEA (Sound Effect Amplifier) modes.
You can use this effect only for playback.
On the Unit
To get the effect, press one of the SOUND MODE buttons,
ROCK, POP, or CLASSIC.
'Ihe selecled Sound Mode name "ROCK", "POP", or "CLASSIC"
appears on the display. Also, the Sound Mode indicator that corre-
sponds to the selecled sound ]node blinks.
TO cancel the effect, press the currently selected mode button
again.
When the effect is canceled, the Sound Mode indicator stays lit.
l_k_r example, if the current Sound Mode is ROCK, press the
ROCK bu/lon again. "OFF" appears on the display, showing that
no sound effect is applied.
8
To Next Page
Loading...
Need help?
General
