EasyManuals Logo
Home>JVC>Speaker System>MX-KA3

JVC MX-KA3 User Manual

JVC MX-KA3
32 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #29 background imageLoading...
Page #29 background image
If you are having a problem with your System, check this list for a possible solution before calling for service.
If you cannot solve the problem from the hints given here, or the System has been physically damaged, call a qualified person, such as
your dealer, for service.
Symptom
No sound is heaM.
Poor radio reception
'Ihe disc tray does not open.
'Ihe CD skips.
'Ihe CD does not play.
'Ihe cassette holder cannot be opened.
Unable to recoM.
Unable to operate the Remote Control.
Operations are disabled.
Possible Cause
Connections are incorrect, or loose.
Headphones are connected,
The antenna is disconnected.
The AM Loop Anlenna is too close
to the Sys/em.
The FM Wire Anlenna is not prop-
erly extended and positioned.
The AC power cord is not plugged in.
Tray is locked.
The CD is dirty or scratched.
The CD is upside down.
During tape playing, the power coM
was unplugged.
Cassette record protect tabs are re-
moved.
The path between the Remote Con-
trol and the sensor on the Unit is
blocked.
The batteries have lost their charge.
The built-in microprocessor has mal-
functioned due to external electrical in-
terference.
Action
Check all connections and make cor-
rections. (See pages 4 to 6.)
Disconnect the headphones.
Reconnect the anlenna securely.
Change the position and direction of
the AM Loop Antenna.
Extend FM Wire Antenna to the best
reception position.
Plug the AC power coM.
Unlock the tray. (See page 15.)
Clean or replace the CD. (See page 25.)
Put the CD in with the label side up.
Plug in the power cord, and turn on the
System.
Cover holes on back edge of cassette
with tape.
Remove the obstruction.
Replace the batteries.
Unplug the System then plug it back in.
26

Other manuals for JVC MX-KA3

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the JVC MX-KA3 and is the answer not in the manual?

JVC MX-KA3 Specifications

General IconGeneral
Output Power80 W per channel
Input Sensitivity/Impedance300 mV/50 kΩ
Frequency Response63 Hz - 12, 500 Hz
Wow And Flutter0.15% (WRMS)
CD Capacity3 CDs
Dynamic Range85 dB
Signal-To-Noise Ratio85 dB
FM Tuner Tuning Range87.5 MHz - 108.0 MHz
AM Tuner Tuning Range530 kHz - 1, 710 kHz
Dimensions267 mm x 305 mm x 433 mm
Mass7.5 kg
Type3-way bass-reflex type
Woofer13.5 cm cone
Mid5 cm cone
Tweeter2 cm dome
Power Handling Capacity80 W
Impedance6 Ω
Frequency Range45 Hz - 22, 000 Hz
Sound pressure level89 dB/W.m
Dimensions228 mm x 316 mm x 258 mm
Mass3.1 kg
Power RequirementsAC 120 V, 60 Hz
Power Consumption125 W (power on mode)
Power Consumption in Standby Mode17 W

Related product manuals