JVC MX-KA3 User Manual

Accessories
Make sure that you have all of the folk)wing items, which are supplied with the System.
AM Loop Anlenna (I)
Remole Control (I)
Batteries (2)
FM Wire Anlenna (1)
If any of these items are missing, contact your dealer hmnediately.
How To Put Batteries In the Remote Control
Match the polarity (+ and ) on the batteries with the + and markings in the battery compartment.
R6P(SUM-3)/AA(15F)
\\
CAUTION:
• Handle batteries properly.
i_ To avoid battery leakage or explosion:
• Remove batteries when the Remole Control will not be used for a long time.
• When you need to replace the batteries, replace both batteries at the same time with new ones.
• Do not use an old battery with a new one.
• Do not use different types of batteries together.
Using the Remote Control
'[he Remote Control makes it easy to use many of the functions of the System from a distance of up to 7m (23 feet) away.
You need to point the Remote Control at the remote sensor on the Syste n s front panel.
.1
_ @ ©o...©_ ©o.,o.._T °T._=.._=A=
r Remote sensor
3

JVC MX-KA3 Specifications

General

Output Power	80 W per channel
Input Sensitivity/Impedance	300 mV/50 kΩ
Frequency Response	63 Hz - 12, 500 Hz
Wow And Flutter	0.15% (WRMS)
CD Capacity	3 CDs
Dynamic Range	85 dB
Signal-To-Noise Ratio	85 dB
FM Tuner Tuning Range	87.5 MHz - 108.0 MHz
AM Tuner Tuning Range	530 kHz - 1, 710 kHz
Dimensions	267 mm x 305 mm x 433 mm
Mass	7.5 kg
Type	3-way bass-reflex type
Woofer	13.5 cm cone
Mid	5 cm cone
Tweeter	2 cm dome
Power Handling Capacity	80 W
Impedance	6 Ω
Frequency Range	45 Hz - 22, 000 Hz
Sound pressure level	89 dB/W.m
Dimensions	228 mm x 316 mm x 258 mm
Mass	3.1 kg
Power Requirements	AC 120 V, 60 Hz
Power Consumption	125 W (power on mode)
Power Consumption in Standby Mode	17 W