JVC MX-KA3 User Manual

Numeric
keys
® ® ®1©
_ "_JI FM/AM
_' FM MODE
SET
FM/AM
Band display, Frequency display, Preset channel
I
I I
F ,,"" ,n,u-_3.5
MONO I_"
FM mode indicators
I_11,-
* When the System is in use, the display shows other items as well.
For simplicity, we show here only the items described in this section
You can listen to FM and AM stations. Sta/ions can be tuned in
manually, automatically, or from preset memory storage.
i_ Before lis/ening to the radio:
• Make sm-e thai both the FM and AM antennas are correctly
connected. (See pages 4 and 5).
OneTouch Radio
Just press the FM/AM bullon to turn on the Syslem and start play-
ing the station you were last tuned to.
i_You can switch from any other sound source to the radio by
pressing the FM/AM button.
Tuning In a Station
1 Press the FM/AM button.
The Band and Frequency you were last tuned to appear on the
display.
(If the last station was selected using the preset number, the
preset number appears first.)
Each time you press the button, the band alternates between
FM and AM.
FM/AM
Fbd o_ or ?
I I <" "_ I"711"11
(on the Unit) (on the Remote Control)
2 Select a station using one of the following
methods.
• Manual Tuning (Using the Unit only)
Briefly press the _1_1 or _ bu//on on the Unit to move
from frequency to frequency until you find the station you
want.
OR
• Auto Tuning (Using the Unit only)
ll" you hold down the _1_1 or _ button on the Unit for l
second or more and then release it, the frequency changes
down, or up, automatically until a station is found.
OR
• Preset Tuning (Possible only after presetting sta-
tions)
Preset tuning using the Unit:
Select the preset numher you want, using the I.,9<1or
button.
Example:
Press the I_,-I bullon until the preset numher"P-I 2" appears
on the display. 'Ihen, the display will show the preset
number's band and frequency.
P__ I72
,& !
• F I_4 I I--I
qq
I , 'U --,.--, MHz
Preset tuning using the Remote Control:
Enler the preset number you want to recall using the numer-
ic keys. See "Entering the Number with the Remote Con-
tml" on page 8.
Example:
Press +10, then 2 to recall the preset number 12. Then, the
display will show the preset number's band and frequency.
9

JVC MX-KA3 Specifications

General

Output Power	80 W per channel
Input Sensitivity/Impedance	300 mV/50 kΩ
Frequency Response	63 Hz - 12, 500 Hz
Wow And Flutter	0.15% (WRMS)
CD Capacity	3 CDs
Dynamic Range	85 dB
Signal-To-Noise Ratio	85 dB
FM Tuner Tuning Range	87.5 MHz - 108.0 MHz
AM Tuner Tuning Range	530 kHz - 1, 710 kHz
Dimensions	267 mm x 305 mm x 433 mm
Mass	7.5 kg
Type	3-way bass-reflex type
Woofer	13.5 cm cone
Mid	5 cm cone
Tweeter	2 cm dome
Power Handling Capacity	80 W
Impedance	6 Ω
Frequency Range	45 Hz - 22, 000 Hz
Sound pressure level	89 dB/W.m
Dimensions	228 mm x 316 mm x 258 mm
Mass	3.1 kg
Power Requirements	AC 120 V, 60 Hz
Power Consumption	125 W (power on mode)
Power Consumption in Standby Mode	17 W