JVC RX-E100RSL User Manual

21
Sound Adjustments
Reinforcing the Bass
You can boost the bass level — Bass Boost.
• You have to make this adjustment for each source.
Before you start, remember...
There is a time limit in doing the following steps. If the setting is
canceled before you finish, start from step 1 again.
1 Press ADJUST.
The CONTROL buttons now work for sound
adjustments.
2 Press CONTROL ∞ (or 5) repeatedly until “B.
BOOST (Bass Boost)” (with the current setting)
*
appears on the display.
* “OFF” is the initial setting. If you have already changed the
setting, “ON” will be shown.
3 Press CONTROL 3 (or 2) to turn “ON” or
“OFF” Bass Boost.
ON : Select this to boost the bass level. (Bass Boost)
OFF : Select this to deactivate Bass Boost.
Note:
This function affects the sound outputting only through the front
speakers.
When using the remote control
Press BASS BOOST.
• Each time you press the button, Bass Boost turns on and off
alternately.
C
VOL
T
O
T
CONTROL
ADJUST
ANALOG
PRO LOGIC
SUBWFR LFE
VOL
DGTL AUTO
INPUT ATT
DSP
LCR
LS S RS
LPCM
DOLBY D
DTS
CONTROL
ANALOG
PRO LOGIC
SUBWFR LFE
VOL
DGTL AUTO
INPUT ATT
DSP
LCR
LS S RS
LPCM
DOLBY D
DTS
Adjusting the Tone
You can adjust the bass and treble sounds as you like.
• You have to make these adjustments for each source.
Before you start, remember...
There is a time limit in doing the following steps. If the setting is
canceled before you finish, start from step 1 again.
1 Press ADJUST.
The CONTROL buttons now work for sound
adjustments.
2 Press CONTROL ∞ (or 5) repeatedly until
“BASS” or “TREBLE” (with the current
setting)
* appears.
BASS : To adjust the bass.
TREBLE : To adjust the treble.
* “0” is the initial setting. If you have already changed the
setting, another number (level) will be shown.
3 Press CONTROL 3 or 2 to adjust the sound
level.
• Pressing CONTROL 3 increases the sound level by +2 steps
(from –10 to +10).
• Pressing CONTROL 2 decreases the sound level by –2 steps
(from +10 to –10).
4 Repeat steps 2 and 3 to adjust the other sound
level.
When using the remote control
1 Press SOUND.
10 keys now work for sound adjustments.
2 Press BASS +/– or TREBLE +/– to adjust the sound output level
(from –10 to +10).
ANALOG
PRO LOGIC
SUBWFR LFE
VOL
DGTL AUTO
INPUT ATT
DSP
LCR
LS S RS
LPCM
DOLBY D
DTS
Ex.: When adjusting the bass level
ADJUST
CONTROL
CONTROL
EN20-22.RX-E100RSL[B]_4 01.3.7, 8:33 PM21

JVC RX-E100RSL Specifications

General

Brand	JVC
Model	RX-E100RSL
Category	Home Theater System
Language	English