JVC SP-DXU10C User Manual

1-10 (No.MB616<Rev.002>)
3.1.3 Removing the VIDEO BOARD assembly
(See Fig.7, 8)
(1) Disconnect the card wire from MAIN BOARD assembly
connected to connector CN920 of the VIDEO BOARD as-
sembly. (See Fig.7)
(2) Disconnect the card wire from SURROUND AMP BOARD
assembly connected to connector CN931
of the VIDEO
BOARD assembly. (See Fig.7)
(3) Remove the three screws D attaching the VIDEO BOARD
assembly. (See Fig.8)
Fig.7
Fig.8
3.1.4 Removing the MECHA CHASSIS
(See Fig.9, 10)
(1) Remove the two screws E attaching the MECHA CHAS-
SIS. (See Fig.9)
(2) Remove the two screws F attaching the both side of
MECHA CHASSIS (See Fig.10)
Fig.9
Fig.10
CN920 CN931
D
E
F

JVC SP-DXU10C Specifications

General

Brand	JVC
Model	SP-DXU10C
Category	Speaker System
Language	English