To Next Page

To Previous Page

(No.MB616<Rev.002>)1-15

3.1.9 Removing the REGULATOR BOARD assembly

(See Fig.19, 20)

(1) Disconnect the card wire from REGULATOR BOARD as-

sembly connected to connector CN305

and CN306 of the

SURROUND AMP BOARD assembly. (See Fig.19)

(2) Disconnect the card wire from FL BOARD assembly con-

nected to connector CN207

of the REGULATOR BOARD

assembly. (See Fig.19)

(3) Disconnect the connector wire from TRANS BOARD as-

sembly connected to connector CN201

of the REGULA-

TOR BOARD assembly. (See Fig.19)

(4) Disconnect the EARTH WIRE from TRANS BOARD as-

sembly connected to pin PP201

of the REGULATOR

BOARD assembly. (See Fig.19)

(5) Remove the one screw M attaching the REGULATOR

BOARD assembly. (See Fig.19)

(6) Disconnect the BOARD TO BOARD connectors CN204

and CN205 connected to SURROUND AMP BOARD as-

sembly and SUBWOOFER AMP BOARD assembly. (See

Fig.20)

Fig.19

Fig.20

CN201

CN207

PP201

CN306

CN305

CN204 CN205

JVC SP-DXU10C User Manual

Questions and Answers: