14
Basic Operation
Switching ON / OFF
When you rst connect the unit to the AC power, the unit will be in Standby mode. The
STANDBY indicator will light up red.
• Press
on the unit or remote control to switch the unit on. The display will show
“HELLO” and the STANDBY indicator will switch o. Then, the system will switch to the
last selected source.
• Press
on the unit or remote control to switch the unit back to standby mode. The
display will show “GOOD BYE” and the standby indicator will light up red. The clock will
be displayed. The unit will switch to ECO-Power mode.
• To switch the unit o completely, remove the mains plug from the mains socket.
• Please turn the unit o completely to save energy when not in use.
ECO-Power Mode
The unit features an ECO-Power / Standby mode. It automatically turns to Standby mode
after 15 minutes if the unit is idle in LINE IN, BT (Bluetooth®), DISC or USB mode or the
external unit is disconnected, switched o or the volume is too close to mute.
Selecting Modes
Press the button on the unit or remote control to switch between DAB, FM, LINE IN, BT
(Bluetooth®), DISC or USB mode. The selected mode will show on the display.
Alternatively, you can directly press the followings buttons on the remote control to switch to your
desired mode:
• BT/UNPAIR to switch to BT mode.
• CD to switch to DISC mode.
• USB/LINE IN to switch to USB/LINE IN mode.
• DAB/FM to switch to DAB/FM mode.
UX-D327B_IB_Final200407V5.indd 14 08/04/2020 16:24
To Next Page
Loading...
Need help?
General
