JVC UX-D327B User Manual

16
Clock Operation
Manually Setting the Clock
Manual setting the clock can only be done in Standby mode.
1. In Standby mode, press and hold SLEEP/CLOCK button.
2. Press
/ or /
button to set 12 HOUR/24 HOUR format.
3. Press the OK/
button, hour indicator will blink.
4. Press
/ or /
button to set the hour.
5. Press the OK/
button, minute indicator will blink.
6. Press
/ or /
button to set the minute.
7. Press the OK/
button to conrm.
8. Press
/ or /
button to select between SYNC-ON or SYNC-OFF for clock
synchronisation.
• To exit timer setting mode without storing, press the button.
• If no button is pressed in approx 90 seconds, the unit exits clock setting mode automatically.
• If a power failure occurs or the unit is disconnected from the mains, the clock setting will be lost.
Time Display
While the unit is in ON mode, press and hold SLEEP/CLOCK button to display the clock.
Setting the Sleep Timer
Use the sleep timer to turn the system o after a certain number of minutes in play mode. By
setting the sleep timer, you can fall asleep to music and know that your system will turn o
by itself rather than play all night.
1. While the unit is in ON mode, press SLEEP/CLOCK on the remote control repeatedly
to view the dierent timer settings. The number of minutes shown will display in this
sequence:
SLEEP 120 SLEEP 90
SLEEP OFF SLEEP 15 SLEEP 30
SLEEP 60 SLEEP 45
2. The system is now set to turn o after the number of minutes you have set.
3. When the sleep timer is activated, “SLEEP” will show on the display.
4. Press SLEEP/CLOCK to show the reminding time till the unit switches o minutes and
return back to previous screen.
5. To cancel the sleep timer, press SLEEP/CLOCK repeatedly until “SLEEP OFF” shows on
the display.
UX-D327B_IB_Final200407V5.indd 16 08/04/2020 16:24

JVC UX-D327B Specifications

General

Brand	JVC
Model	UX-D327B
Category	Stereo System
Language	English