11
Setting the Clock
Set the clock before using the Daily Timer (see pages 18
and 19) and the Sleep Timer (see the next column).
• This function is available only when the System is turned
off (on standby).
1 Turn off (standby) the System.
2 Activate the clock setting mode.
3 Adjust the hour.
4 Adjust the minute.
The built-in clock starts working.
To check the current time during play
The time is displayed for a few seconds.
If there is a power failure
The clock loses its settings and “0:00” flashes. You need to
set the clock again.
Turning Off the Power Automatically—
Sleep Timer
You can set the unit to turn off after a certain period of time.
1 Activate Sleep Timer.
2 Specify the time (in minutes).
To check the time remaining until the shut-off time
• If you press the button repeatedly, you can change the shut-
off time.
2 sec.
2 sec.
SLEEP
(Canceled)
SLEEP
2 sec.
UX-G250D[B].book Page 11 Friday, June 6, 2008 10:02 PM
To Next Page
Loading...
Need help?
General
