14
Searching for a Service by PTY Codes
You can locate a particular kind of program from among all
services you can receive by specifying PTY codes.
1 While listening to the DAB radio...
2 Select a PTY code.
3 Start searching.
The System searches for all available ensembles, stops
when it finds a program of the selected PTY code, and
switches to the service.
• If no program is found, “NOTFOUND” appears on the
display.
• To stop searching any time during search, press STOP
7.
To continue searching after it stops on an unwanted
service
While the PTY code is flashing on the display, press PTY
SEARCH again.
Changing the Display Mode
While listening to the DAB radio...
Remote
ONLY
BAND
BAND
• For details about each PTY code,
see page 21.
BAND
BAND
Ex. When “NEWS” is selected
Service
label
“NOSIGNAL” will appear if no signal is
sent.
PTY The broadcast program type is
displayed. “NONE” will appear if no
signal is sent.
DLS Dynamic Label Segment (text messages
the station sends) is displayed. “NO
TEXT” will appear if no signal is sent.
Remote
ONLY
Service label
Ensemble ID
Frequency
Preset number
PTYDLS
UX-G250D[B].book Page 14 Friday, June 6, 2008 10:02 PM
To Next Page
Loading...
Need help?
General
