12
DAB Operations
What is DAB system?
DAB (Digital Audio Broadcasting) is one of the digital radio
broadcasting systems available today. It can deliver digital
quality sound without any annoying interference or signal
distortion. Furthermore, it can carry text, pictures and data.
In contrast to FM broadcast, where each program is
transmitted on its own frequency, DAB combines several
programs (called “services”) to form one “ensemble.”
“Primary services” (main radio stations) are sometimes
accompanied by “secondary services” to broadcast
additional programs.
Listening to a Service
1 Select DAB.
• When you change the source to DAB for the first time
after plugging in the System, it automatically starts to
scan available ensembles (see the next page).
2 Select an ensemble.
• You can choose one of the ensembles found by the
ensemble scanning.
To choose from all ensembles, see “To select a service
from all ensembles” on the next page.
3 Select a service (either primary or secondary) you
want to listen to.
Ex.
Remote control
TUNING/PTY
5
/K
PTY
SEARCH
DISPLAY
PROGRAM
SERVICE
SELECT +/
– DAB/FM/
AUDIO IN
PRESET
1
/y
Number
buttons
Ensemble
12B (225.64 MHz)
Ensemble
12C (227.36 MHz)
Frequency
Press TUNING
5/K.
Press SERVICE
SELECT +/–.
service 1
service 2
service 3
Caution
Electrostatic discharge from your body may cause noise
from the speakers and you cannot hear the broadcast.
If this happens, turn off the System (on standby), then
turn it on again.
Remote
ONLY
BAND
STEREO
DAB
UX-G250D[B].book Page 12 Friday, June 6, 2008 10:02 PM
To Next Page
Loading...
Need help?
General
