EasyManuals Logo
Home>JVC>Stereo System>UX-G60

JVC UX-G60 User Manual

JVC UX-G60
44 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #8 background imageLoading...
Page #8 background image
5
!
TV/monitor
Connect only component cord or scart cord at one time.
To select progressive scanning mode (see page 13), use
VIDEO OUT jacks.
After connecting a TV, select the proper video signal mode
according to the connection method. See “Changing the
Scanning Mode” on page 13.
To connect the powered subwoofer
The subwoofer connected can reproduce the bass sounds
recorded in front left and right channels, but cannot
reproduce the LFE signals in DVD multi-channel discs.
Before plugging the unit to the main supply, make sure that
the powered subwoofer is turned off.
@
Digital audio component
Set “DIGITAL AUDIO OUTPUT” in the “AUDIO” menu
correctly according to the connected digital audio
equipment (see page 32). If
the
setting is incorrect, loud
noise may be generated causing damage to the speakers.
By using QP Link (Quick Portable Link), you can easily
start playing back a portable audio device on this unit. See
page 10 for details.
If an external device is not equipped with a stereo mini plug
audio output, use a plug adaptor to convert the stereo mini
plug to the corresponding plug of the audio output.
You can connect a USB mass storage class device such as a
USB flash memory device, hard disk drive, multimedia card
reader, etc. to this System. See pages 9 and 33 for details.
If you press USB MEMORY 3
, the System detects the
USB mass storage class device and the control screen
appears on the TV screen
. See page 27 for details.
Preparing the remote control
Dispose of batteries in the proper manner, according to
federal, state, and local regulations.
When using the remote control
Point the top of the remote control toward the remote sensor
as directly as possible. If you operate it from a diagonal
position, the operating range (approx. 5 m) may be shorter.
Green
Blue
Red
Component video cord
(not supplied)
This connection sends
the video signal
(Composite, Y/C, or
RGB) and receives audio
signal from TV. To listen
to the TV sound, see
page 8.
Scart cord (not supplied)
SUBWOOFER
OUT
From the powered
subwoofer
(not supplied)
Protective cap
When connecting a portable audio device (AUX)
When connecting a USB mass storage class device
DO NOT recharge, short, disassemble, heat
the battery or dispose of it in a fire.
Stereo mini plug
(not supplied)
At the front
panel
USB cable
(not supplied)
At the front
panel
R6(SUM-3)/AA(15F)
UX-G60[B].book Page 5 Wednesday, January 18, 2006 11:41 AM

Other manuals for JVC UX-G60

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the JVC UX-G60 and is the answer not in the manual?

JVC UX-G60 Specifications

General IconGeneral
Woofer diameter120 mm
Tweeter diameter40 mm
Signal-to-Noise Ratio (SNR)80 dB
Speakers2-Way, Bass-Reflex
I/O portsOptical audio out Subwoofer out AUX in SCART Composite out Component out Headphone out USB
DVD Audio playbackYes
Tuner typeDigital
Supported radio bandsAM, FM
Preset stations quantity45
TypeHome audio micro system
Number of optical discs1 discs
Weight and Dimensions IconWeight and Dimensions
Weight5000 g
Center speaker dimensions (WxDxH)145 x 250 x 195 mm

Related product manuals