3.4.2 Incremental encoder input / -emulation X3B
The encoder interface X3 is switchable from an incremental encoder emulation to an
incremental encoder input. The increments of the emulation are xed to 1024 for units with
resolver interface.
Max. input frequency: < 300 kHz
Signals: RS 422 / 2 track signals and zero signals
max. transmission link: 50 m
Approved encoder types: Kübler RS 422 signals with 10…30 V voltage supply
The 12 V supply voltage at X3B is loadable with
altogether 100 mA. If higher voltages / currents
are needed for the supply of the incremental
encoder, then the encoder must be supplied
with an external voltage.
Socket X3B
To Next Page
Loading...
Need help?
General