6
Replaceable Parts
6-1
6.1 Introduction
This section contains replacement parts information,
schematic diagrams, and component layout drawings
for the Model 7012-S and 7012-C.
6.2 Parts lists
Parts lists for the various circuit boards are included in
tables integrated with schematic diagrams and compo-
nent layout drawings for the boards. Parts are listed al-
phabetically in order of circuit designation.
6.3 Ordering information
To place an order, or to obtain information concerning
replacement parts, contact your Keithley representa-
tive or the factory (see inside front cover for addresses).
When ordering parts, be sure to include the following
information:
1. Card model number (7012-S or 7012-C)
2. Card serial number
3. Part description
4. Circuit description, if applicable
5. Keithley part number
6.4 Factory service
If the card is to be returned to Keithley Instruments for
repair, perform the following:
1. Complete the service form at the back of this man-
ual and include it with the card.
2. Carefully pack the card in the original packing car-
ton.
3. Write ATTENTION REPAIR DEPT on the shipping
label.
Note: It is not necessary to return the mainframe with
the card.
Artisan Scientific - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisan-scientific.com
To Next Page
Loading...
Need help?
General
