1-2 Return to Section Topics 2600S-900-01 Rev. C / January 2008
Section 1: Front and Rear Panel Operation Series 2600 System SourceMeter
®
Instruments User’s Manual
Front and rear panel familiarization
Front panel summaries
The front panels of the Keithley Instruments Series 2600 System SourceMeter
®
are shown in
Figure 1-1. The descriptions of the front panel controls follow Figure 1-1.
Rear panel summaries
The rear panels of the Models 2601/2602 and 2611/2612 are shown in Figure 1-2 on page 1-6.
The rear panels of the Models 2635 and 2636 are shown in Figure 1-3 on page 1-8. The
descriptions of the rear panel components follow Figure 1-2 and Figure 1-3.
Safety symbols and terms
The following symbols and terms may be found on the instrument or used in this manual:
The
!
symbol on an instrument indicates that the user should refer to the operating instructions
located in the manual.
The symbol on the instrument shows that high voltage may be present on the terminal(s). Use
standard safety precautions to avoid personal contact with these voltages.
The symbol on an instrument shows that the surface may be hot. Avoid personal contact to
prevent burns.
The WARNING heading used in this manual explains dangers that might result in personal injury
or death. Always read the associated information very carefully before performing the indicated
procedure.
The CAUTION heading used in this manual explains hazards that could damage the instrument.
Such damage may invalidate the warranty.
To Next Page
Loading...
Need help?
General
