Keithley 6430 Quick Results Guide

14 Quick Results Guide
Table 5
Auto ohms measurement procedure
Procedure Details
1. Select ohms measurement
function.
Press MEAS .
2. Select auto ohms measurement
method.
Press CONFIG > press MEAS  > select
SOURCE > select AUTO.
3. Select measurement range. Use RANGE  and  keys to manually select
range. Or press AUTO RANGE (AUTO annunciator
on) to enable auto range.
4. Turn output on and take readings
from display.
Press ON/OFF OUTPUT key. OUTPUT indicator
on.
5. Turn output off when finished. Press ON/OFF OUTPUT key. OUTPUT indicator
off.
Table 6
Manual ohms measurement procedure
Procedure Details
1. Select ohms measurement
function.
Press MEAS .
2. Select manual ohms measurement
method.
Press CONFIG > press MEAS  > select
SOURCE > select MANUAL.
3. Select source, set source level, and
set compliance limit.
See steps 1, 2, and 3 of Table 3.
4. Select measurement range (see
Notes 1 and 2).
Use RANGE  and  keys to manually select
range. Or press AUTO RANGE (AUTO annunciator
on) to enable auto range.
5. Turn output on and take readings
from display.
Press ON/OFF OUTPUT key. OUTPUT indicator
on.
6. Turn output off when finished. Press ON/OFF OUTPUT key. OUTPUT indicator
off.
Notes
1. If sourcing I, you will be selecting the V measure range. If sourcing V, you will be selecting the I measure
range.
2. The compliance range determines the maximum measurement range that can be selected.

Keithley 6430 Specifications

General

Brand	Keithley
Model	6430
Category	Measuring Instruments
Language	English