I EXHAUST FILTERCHANGING
The exhaust filter cartridge must be replaced regularly. Replace the filter when the entire
surface area is covered evenEy. The filter CANNOT be washed as it will lose its dust trap-
ping ability.
NOTE: Use replacement exhaust filter STYLEEF-1, see part number detail in REPLACEMENT
PARTS(page 6).
_llb WARNING
Fire and/or Electrical Shock Hazard
Do not operate with a clogged exhaust
filter or without the exhaust Filterinstalled,
Do not operate without filter cover
installed.
1. Pull out and down on
the exhaust filter cover
to remove from the
canister and lay aside.
Filter
2. Pull the exhaust
filter up and out
from the rear of
the canister.
3. Replace the
exhaust fTIter
cartridge. Place
the new filter into
the canister with
the foam seal
facing towards
the canister.
Slols
Tabs
Filter
4. Replace the
exhaust fi_ter cover
by placing the two
tabs on the filter
cover into the slats
on the canister and
rotate into place
until it snaps closed.
22
To Next Page
Loading...
Need help?
General
