SECTION 2. PREPARE THE MACHINE FOR SEWING
• Pick Up the Bobbin Thread
T
1. Raise presser foot Iever. Held top
threadloosely in left hand and rotate
handwhee] toward you one complete
turn.
2, Bring bobbin thread up by pulling top
thread.
3. Pull both threads under and to the back
of the presser toot, leaving 4 to 6
inches of thread clear.
If you cannot pick up bobbin thread by following steps given above, then check:
1. Is needle threaded lrom front to back?
2, Is thread tangled around needle?
3. Are 3 to 4 inches of thread coming from the shuttle?
4, Is thread lrom shuttle tangled?
5. Is bobbin property installed in the bobbin case?
6, ls the machine threaded according to the instructions?
12
To Next Page
Loading...
Need help?
General
