SECTION 2. PREPARE THE MACHINE FOR SEWING
Set Up the Machine
Plug in the Machine and Switch on the Power
f
Power supply plug
Power switch
\
COnnector
supply
Machine p}ug
........ J
NOTE: 8etore inserting the plug into your
machine, be sure the power switch is OFF,
t. Check your outlet to be sure it is a 110 to 120 Volt
AC outlet.
2. Insert the machine plug into the three-prong plug
connector, as shown, it will only fit one way.
3. Insert the power supply plug into the outlet.
Power swilch
%
4. Push the power switch to turn on the
power and sewing light.
SAFETY FEATURE:
Your machine will not operate unless the
power switch is turned on. II you are
interrupted or stop sewing, turn off the
power switch to prevent injury to children.
= Foot Control Use
f
/
Fool control
% /
The foot control regulates the speed at which
you sew.
To increase speed, gently press down with
the bail ot your toot.
To decrease speed, release your toot pres-
sure slightly.
NOTE: The toot control is sensitive and will
increase or decrease your sewing
speed immediately.
Practice on a scrap of fabric to regu
late your sewing speed to your
taste and needs.
To Next Page
Loading...
Need help?
General
