Setup
58
5
Touch [Learning completed].
NOTE
• When changing the function already learned,
press and hold the button you want to change
in step 2 and then touch to select the changed
function from the function list.
• Confirm the contents of the settable function on
the function list. You cannot edit the function list.
• To initialize the contents, touch [Learning
initialisation] of [Steering Remote
Controller] in User Interface setting menu. After
you touch [Initialise], a confirmation message
appears. Follow the message and complete the
operation.
System Setup
You can setup system parameters.
1
Press the [HOME]/[ ] button.
2
Touch [ ].
3
Touch [SETUP].
SETUP Menu screen appears.
4
Touch [System].
System setting menu appears.
5
Set each parameter as follows.
■ [DEMO]
Select the demonstration mode. Default is
“ON”.
■ [Software Information]
Confirm the software version of this unit.
(P.59)
■ [Open Source Licenses]
Display the open source licenses.
■ [Initialise]
Touch [Initialise] and then touch [Ye s] to set
all the settings to the initial default settings.
• Audio SETUP Memory is not initialized.
■ [OEM SETUP]
Confirm the information about or change the
settings for using the iDatalink (commercially
available).
■ [Language select]
Select a language.
■ [Time Format]
■ [Clock]
■ [Time Zone]
■ [Clock Adjust]
You can set the date and time. See
Calendar/clock settings (P.10).
!B5A-3356-00_20DDX_M_FP_En.indb 58 2020/08/04 8:15
To Next Page
Need help?
General
