Digital Radio
32
Digital Radio
(DMX9720XDS)
Digital Radio Basic Operation
Most functions can be controlled from the
source control screen.
To enter Digital Radio source, touch [Digital
Radio] icon in the source selection screen.
(P.13)
NOTE
• Set the remote control mode switch to AUD
mode before starting operation, see Switch the
operation mode (P.72).
Control screen
3
6
1
2
5
4
Open the drawer
3
7
6
8
3
6
9
1
Indicator display
Displays the received signal strength.
2
Operation keys
• [1] : Displays the Service List screen. For details
on search operation, see Service search
(P.34).
• [E] [F] : Tunes in a ensemble, service, and
component. The seek mode switching can be
changed. (see
5
Seek mode).
• [
] : Touch to mute or not to mute.
3
Function panel
Touch the left side of the screen to display the
function panel. Touch again to close the panel.
• [TI]: Selects the traffic information mode. For
details, see Traffic Information (P.34).
• [SETUP]: Displays the Digital Radio SETUP
screen. For details, see Digital Radio SETUP
(P.35).
• [PTY]: Searches for a program by program
type. For details, see Search by program type
(P.33).
• [DLS]: Display the Dynamic Label Segment
screen.
4
Indicator display
P#: Preset number
CH#: Channel display
5
Seek mode
Touch to switch seek modes in the following
sequence: [AUTO1], [AUTO2], [MANUAL].
• [AUTO1]: Tunes in a ensemble with good
reception automatically.
• [AUTO2]: Tunes in the memorized ensemble
one after another.
• [MANUAL]: Switches to the next ensemble
manually.
6
Preset list
• Touching [
]/[ ] allows you to change the
display size.
• Recalls the memorized service.
• When touched for 2 seconds, stores the
currently being received service in the
memory.
7
Artwork area
The picture data is displayed if available from
current content.
!B5A-3356-00_20DDX_M_FP_En.indb 32 2020/08/04 8:14
To Next Page
Loading...
Need help?
General
