Kenwood KTC-500DAB User Manual

Connecting the antenna
1. Place the antenna cable so that it follows a path to your vehicle's power socket.
2. If possible, tuckthe cable behind the trim down the side of your windscreen.
Alternatively, secure the cable to your windscreen and dashboard with self-adhesive
clips.
3. Gently pull the auxiliary cable from the USBpower cable to separate them.
4. Insert the USB power cable into the supplied 12V power adapter, then insert the
power adapter into your vehicle's power socket.
5. If you're connecting your KTC-500DAB with an auxiliary cable, insert the cable into
your vehicle's auxiliary socket. If you're connecting your KTC-500DAB by FM radio,
you can store the auxiliary cable so it's out of the way.
We recommend you connect your KTC-500DAB with an auxiliary cable to get the
best audio quality.
10

Kenwood KTC-500DAB Specifications

General

DIN size	-
Output power	- W
Product color	Black
Disc types supported	No
Firmware upgradeable	Yes
Audio output channels	- channels
Bluetooth profiles	A2DP, AVRCP, HFP, HID, MAP, PBAP, SSP
USB ports quantity	1
FM band range	87.6 - 107.9 MHz
Supported radio bands	DAB, DAB+, FM
Display type	LCD
Storage temperature (T-T)	-40 - 85 °C
Operating temperature (T-T)	-20 - 60 °C