Kenwood KTC-500DAB User Manual

Settings
Changing between auxiliary connection and FM transmission
You can choose how your KTC-500DAB is connected to your vehicle's audio system.
1. Press
.
2. Turn and press the Select dial to choose 'SETTINGS' > 'AUDIOOUT'.
3. Turn and press the Select dial to choose how to connect your KTC-500DAB to your vehicle.
• If you've connected your KTC-500DAB with an auxiliary cable, choose ‘LINEOUT’. Then turn and press the Select dial to
choose a gain setting of 'LOW' or 'NORMAL'. If the audio sounds distorted, choose 'LOW'.
• If you're connecting your KTC-500DAB over FM radio, choose ‘FMTRANSMIT' and then choose an FM frequency. Ensure
a radio station isn't using the frequency you choose.
Setting your KTC-500DAB to enter standby automatically
By default, your KTC-500DAB enters standby after 4hours, but you can change the delay.
1. Press .
2. Turn and press the Select dial to choose 'SETTINGS' > 'AUTOSTANDBY'.
3. Turn and press the Select dial to choose a delay between 1 and 8 hours.
Radio settings
Performing an autotune
If you can't find any digital radio stations, try retuning your KTC-500DAB.
l To perform an autotune, press and hold the Select dial when you are in digital radio mode.
16

Kenwood KTC-500DAB Specifications

General

DIN size	-
Output power	- W
Product color	Black
Disc types supported	No
Firmware upgradeable	Yes
Audio output channels	- channels
Bluetooth profiles	A2DP, AVRCP, HFP, HID, MAP, PBAP, SSP
USB ports quantity	1
FM band range	87.6 - 107.9 MHz
Supported radio bands	DAB, DAB+, FM
Display type	LCD
Storage temperature (T-T)	-40 - 85 °C
Operating temperature (T-T)	-20 - 60 °C