Name: Kenwood KTC-500DAB
Brand: Kenwood
Rating: 4 (1 reviews)

To Next Page

To Previous Page

Connecting the microphone to the antenna

1. Insert the microphone connector into the socket at the top of the antenna, until it

clicks into place.

Note: Push the microphone cable in firmly, to ensure it's fully inserted.

2. To keep the microphone cable out of the way while you position the antenna,

temporarily clip the microphone so that it's near the driver's position. For example, clip

the microphone to the driver's sun visor.

Positioning the antenna

1. Choose a position for the antenna, so that it's as high as possible on the windscreen

and at least 4cm from the side of the screen.

Make sure the antenna does not obstruct the view of the driver.

2. Gently pull down the front of the roof liner in your vehicle, until there is a small gap.

3. Push the magnetic grounding tail through the gap, with the silver-coloured magnet

facing upwards. Make sure the magnet touches your vehicle's metal bodywork.

4. Clean the chosen area of the windscreen with a cleaning cloth and wait for it to dry.

5. Unpeel the backing from the antenna and stick the antenna onto your windscreen.

Questions and Answers:

Need help?

Do you have a question about the Kenwood KTC-500DAB and is the answer not in the manual?

Kenwood KTC-500DAB Specifications

General